Unscrew front wall with screw driver
Remove artwork from inner crate
by gently lifting, then open the cardboard
Remove the 4 triangle corners and
lift inner crate out of the outer crate
Scrape foam from the top of each Corner
The amount of screws vary on each crate dependent on its size. The crate is re-usable and perfectly fitted for your vauable art. So store your screws in a safe place or put the outer wall back on the crate and everything will stay in its place.
After removing the screws from the corners, the inner crate can be lifted out of the outer crate.
Any larger sharp knife can be used. Cut the foam like suggested in the graphic - Foam is 100% biodegradable and can be reused for further shipping.
 
©2011 Museum Choice Crating and Shipping, LCC
Headquarters: 4750 W Sahara Ave. Suite 34, Las Vegas, NV 89102 Tel: (702) 822-2220 Email: info@museumchoice.com.
All artwork and photos are copyrighted by MCC&S. No portion of this website may be reproduced without express permission. All rights Reserved.